VENDO PREVIO ACÚSTICO K&K SOUND TRINITRY
Publicado: 15 Oct 2013, 11:18
Vendo este buen previo de la casa K&K Sound, modelo Trinitry, formato petaca, especialmente recomendable para acústicas o resonadoras. Tiene dos canales, que sirven para mezclar el de un micro con el del trasductor de una pastilla acústica, cada canal con control independiente de GAIN (+20 db) y equalizador.
Mejor copio y pego de la web:
The Trinity Preamp allows for perfect balancing of a microphone and a pickup/transducer. Channel 2 is a designated mic channel and supplies 9-volts to a lavalier type microphone. Each individual channel features volume, gain, +/- 20 dB bass, midrange, and treble filters. The EQ is accessible inside the box with trimpots. A convenient belt clip is included with this compact preamp, which weighs a mere ten ounces with the battery installed.
The Trinity Preamp is built with K&K's "Silent-Filter-Technology" using only full-size components. We use full size capacitors and transistors because we think that they sound better than the miniature components in most of today's guitar preamps.
Aside from its strong bass, midrange, and treble filters (for each channel), it offers internal gain adjustments which set the pre-amplification factor from 1 to 10 (per channel). This means you can boost the input signal up to the 10-fold amount. It features two volume controls knobs on the outside of the box, one 1/4" stereo input (tip-pickup, ring-mic), a line level 1/4" mix output, and an optional 1/4" mic output that allows for splitting the two outputs for individual processing. Inside the box are adjustable controls for gain, bass, midrange and treble for each channel. The tone controls offer an incredible +/- 20 dB. This is a wider range than some big boards on the market today!
To keep the box as small as possible these controls are trim pots (small potentiometers that can be adjusted with the supplied precision screw driver). Once you've installed both pickups, you should adjust the trim pots to your personal taste and needs. During performance, the two volume knobs on the outside allow for fast balancing on the fly.
The Trinity Preamp has a Main/Mix Out which carries both channels (mixed), plus the option of individual channel ouputs if a second cable is inserted in the center output.
Technical Specs
Frequency range 10 - 30,000 Hz
Input Impedance: 1 Mega Ohm pickup -500K mic
Output Impedance: 3 K Ohm
Average Current: 3.5 mA
Battery hours: about 60
Dimensions: 110 x 85 x 38 mm / 4+3/8" x 3+3/8 x 1+ 1/2"
Input and Output Jacks: 1/4" instrument jacks
Bass, mid, treble EQ, gain and volume controls per channel
http://kksound.com/products/trinitypreamp.php
Está en buen estado, y funcionando perfectamente! Viene con sus instrucciones, No tengo el embalaje original , pero envio bien embalado y metido en una funda de cuero (de una cámara) que le viene al pelo!
PRECIO: 105€, ENVIO INCLUÍDO.
Mejor copio y pego de la web:
The Trinity Preamp allows for perfect balancing of a microphone and a pickup/transducer. Channel 2 is a designated mic channel and supplies 9-volts to a lavalier type microphone. Each individual channel features volume, gain, +/- 20 dB bass, midrange, and treble filters. The EQ is accessible inside the box with trimpots. A convenient belt clip is included with this compact preamp, which weighs a mere ten ounces with the battery installed.
The Trinity Preamp is built with K&K's "Silent-Filter-Technology" using only full-size components. We use full size capacitors and transistors because we think that they sound better than the miniature components in most of today's guitar preamps.
Aside from its strong bass, midrange, and treble filters (for each channel), it offers internal gain adjustments which set the pre-amplification factor from 1 to 10 (per channel). This means you can boost the input signal up to the 10-fold amount. It features two volume controls knobs on the outside of the box, one 1/4" stereo input (tip-pickup, ring-mic), a line level 1/4" mix output, and an optional 1/4" mic output that allows for splitting the two outputs for individual processing. Inside the box are adjustable controls for gain, bass, midrange and treble for each channel. The tone controls offer an incredible +/- 20 dB. This is a wider range than some big boards on the market today!
To keep the box as small as possible these controls are trim pots (small potentiometers that can be adjusted with the supplied precision screw driver). Once you've installed both pickups, you should adjust the trim pots to your personal taste and needs. During performance, the two volume knobs on the outside allow for fast balancing on the fly.
The Trinity Preamp has a Main/Mix Out which carries both channels (mixed), plus the option of individual channel ouputs if a second cable is inserted in the center output.
Technical Specs
Frequency range 10 - 30,000 Hz
Input Impedance: 1 Mega Ohm pickup -500K mic
Output Impedance: 3 K Ohm
Average Current: 3.5 mA
Battery hours: about 60
Dimensions: 110 x 85 x 38 mm / 4+3/8" x 3+3/8 x 1+ 1/2"
Input and Output Jacks: 1/4" instrument jacks
Bass, mid, treble EQ, gain and volume controls per channel
http://kksound.com/products/trinitypreamp.php
Está en buen estado, y funcionando perfectamente! Viene con sus instrucciones, No tengo el embalaje original , pero envio bien embalado y metido en una funda de cuero (de una cámara) que le viene al pelo!
PRECIO: 105€, ENVIO INCLUÍDO.
